Checking Standby Electricity in a Small AC Charging Installation

Check standby electricity in an alternating-current (AC) installation by observing a defined non-charging condition over a known period. Record which equipment is included, whether vehicles are connected and which features remain active. Subtracting a session report from the building’s electricity bill is unlikely to isolate the chargers’ standby use.
A small car park can have long periods with no energy going into vehicles. The owner may reasonably want to understand the electricity used during those periods. The first step is a clear observation plan, not an assumption that equipment uses nothing whenever the charging screen shows no active session.
Define what “not charging” means
A chargepoint with no vehicle connected is not necessarily in the same operating condition as one with a vehicle connected but waiting. A display, communications connection or payment terminal may also remain active. Record the actual state rather than using one label for everything.
ENERGY STAR’s electric-vehicle supply-equipment criteria distinguish no-vehicle and other operating modes and account for enabled auxiliary features. This is useful background for asking the supplier about test conditions. It does not establish the standby performance of a particular installed product or impose those criteria on a UK site.
For a practical site observation, name the condition plainly: no vehicle connected, normal network connection available and the equipment left in its normal permitted operating state. If a different state is of interest, measure and label it separately.
Keep the measured boundary small enough to explain
Ask the electrical team which existing meter or approved measurement method can isolate the charging equipment. Establish whether the observation includes a shared controller, router, lighting or other devices. Those loads may belong in the installation’s running costs, but they should not be silently attributed to the chargepoint alone.
A general building meter can be useful only where changes in other consumption are understood. An overnight increase could also involve heating, security systems or cleaning equipment. Do not call a difference “charger standby” simply because no vehicles charged during the same hours.
No investigation should require a property manager to open an electrical enclosure or attach improvised measuring equipment. Use a suitably qualified person where electrical measurement or circuit access is necessary.
Compare energy over time, not isolated display readings
Record the start and finish of the observation, the energy change and the equipment state. Include enough ordinary operation to identify whether the result is repeatable. Keep a note of interruptions, software updates or equipment that was taken out of service during the period.
As a hypothetical example, 0.18 kWh recorded across twelve hours would represent an average of 0.015 kW, or 15 W, within that measured boundary. This is arithmetic using an assumed observation, not an EVB specification or a recommendation for acceptable standby power.
The same average should not automatically be multiplied across an entire year. First determine whether that state represents the site’s actual hours, connected vehicles and enabled services. An annual estimate is only as useful as those assumptions.
Compare the quoted configuration, not the family name
The AC product families listed by EVB include wall-mounted equipment and floor-mounted products with payment facilities. That variety gives procurement a reason to request model-specific non-charging information. One unqualified standby figure should not be transferred between different configurations.
Ask which options were active when a supplier’s figure was established. Compare like with like before treating a difference as a product advantage. A product’s useful functions and its non-charging consumption belong in the same purchasing discussion.
Use the result to answer an operating question
A satisfactory record states the measured equipment, period, operating state, method and uncertainty. It should allow someone else to understand what the figure includes without reconstructing the investigation from emails.
If the result is unexpectedly high, take that record to the supplier or electrical team. They can assess whether it reflects the expected configuration, an included auxiliary load or a condition requiring investigation. Do not disable communications, safety functions or payment equipment solely to produce a lower number.
The aim is an explained operating cost. A modest, repeatable observation with a clear boundary is more useful than a precise-looking annual total based on an unknown equipment state.